GSO IEC 61755-3-5:2014
IEC 61755-3-5:2006
Gulf Standard
Current Edition
·
Approved on
25 December 2014
Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
GSO IEC 61755-3-5:2014 Files
English
19 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO IEC 61755-3-5:2014 Scope
This part of IEC 61755 defines dimensional limits and material properties of a 2,5 mm and a
1,25 mm diameter cylindrical composite ferrule optical interface to meet specific requirements
for PC fibre-to-fibre interconnection. The composite ferrule uses different materials in the end
face contact zone and in the ferrule to sleeve contact zone. The specified materials for each
zone are Zirconia (ZrO2) for the ferrule to sleeve contact zone and Cu-Ni-alloy for the end
face contact zone. Ferrules made from the material specified in this document are suitable for
use in categories C, U and O as defined in IEC 61753-1.
NOTE If mated within the same family (cylindrical PC ferrule) the ferrules specified in this document are intended
to have the same optical attenuation performance grade for connections with all ferrules described in IEC 61755-3
documents.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
GSO 1899:2016
Gulf Standard
GCC Standard voltages and frequencies for AC transmission and distribution systems
Recently Published from Electrical Sector
GSO ISO 20816-21:2026
ISO 20816-21:2025
Gulf Standard
Mechanical vibration — Measurement and evaluation of machine vibration — Part 21: Horizontal axis wind turbines
GSO CEN/TR 16999:2026
CEN/TR 16999:2019
Gulf Standard
Solar energy systems for roofs - Requirements for structural connections to solar panels
GSO IEC 63522-32:2026
IEC 63522-32:2025
Gulf Standard
Electrical relays - Tests and measurements - Part 32: Acoustic noise
GSO IEC TR 63411:2026
IEC TR 63411:2025
Gulf Standard
Grid connection of offshore wind via VSC-HVDC systems
Select GSO Member Stores
